SECM Tutorial

SECM Tutorial at the ISE Online Meeting

This year Prof. Gunther Wittstock from Oldenburg and Prof. Wolfgang Schuhmann from Bochum, two true experts in the field of scanning electrochemistry microscopy (SECM) will hold an online tutorial at the ISE annual meeting with the title

“Solving research problems by means of scanning electrochemical microscopy (SECM) and related techniques”

The online meeting will consist of online lectures, poster sessions and tutorials.

ISE logo

31st August – 4th September

(The exact time of the tutorial is not yet fixed)

Deadline for registration is 31st of July.

The registration for ISE members is FREE and for non-members it cost 50€ above 30 years and 15€ below 30 years.

Register to take this opportunity and learn everything about SECM that you always wanted to know!

Catalysts SPECM Water Splitting

Micropatterning of a photocatalyst surface followed by evaluation of its local catalytic activity

The ElProScan ELP 3 SPECM has been used for an innovative two-step scanning photoelectrochemical microscopy (SPECM) experiment consisting of micropattering and consecutive evaluation of catalytic activty.

In the first step, a BiVO4 seminconductor surface was modified by photodeposition with the electrocatalyst FeOOH to fabricate a photocatalyst system for the photoelectrochemical water splitting reaction. The inverted microscope of the ELP 3 was hereby used to illuminate different spots of the surface with varying illumination time (10, 15, 20 and 25 min) in a matrix scan. This way, a regular pattern with catalytically active spots with different loadings of FeOOH were produced.

In the second step, the photocatalyst pattern was scanned via SPECM and the photocurrent at the sample was recorded yielding a map showing that the highest catalytic activity is found for the spot after 20 min of photodeposition. Additionally, to determine the Faradayic efficiency the oxygen which was produced in the water splitting reaction was detected by the oxygen reduction reaction (ORR) at a microelectrode . The microelectrode was aligned with inverse microscope and therefore with the illuminated sample area. Shear Force Sensing was used to keep a constant distance between microelectrode and sample surface to probe the pure catalytic activity without effects of sample topography. The z position of the microelectrode is further used to obtain the topography map of the sample.

Photodeposition of FeOOH catalyst spots with different loading on a BiVO4 semiconductor surface by SPECM (left) and consecutive evaluation of their catalytic activity by SPECM (right). The recorded signals are the photocurrent at the sample, the locally produced oxygen at the microelectrode and the topography via Shear Force Sensing.

Chen, S., Prins, S. and Chen, A. (2020) ‘Patterning of BiVO4 Surfaces and Monitoring of Localized Catalytic Activity using Scanning Photoelectrochemical Microscopy’, ACS Applied Materials & Interfaces.


These experiments show that the multi-functional ELP 3 SPECM can be used to easily fabricate catalyst libraries which can in a second step be evaluated regarding their local catalytic activity greatly accelerating the search for new highly active catalyst materials.

The latest model of our ELP 3 SPECM-FL has a second illumination port for small spot illumination for illuminated spot sizes down to 5 µm. This match of illuminated sample area and microelectrode size further improves the collection efficiency at the microelectrode and the quality of the experimental results.

bio-related SECM

Influence of mechanical microenvironment on the redox state of cardiomyocytes

The regulation of intracellular redox microenvironment is of immense importance for the homeostasis of cells. The mechanical microenvironment plays a key role in the regulation of the phenotype and function of cardiac cells, which are strongly associated with the intracellular redox mechanism of cardiomyocytes. Glutathione (GSH) is the most abundant intracellular nonprotein thiol and functions as one of the most important endogenous antioxidants in cells. Under normal physiological conditions, intracellular chemical microenvironment is maintained in a relatively reduced state due to a higher GSH concentration than that of glutathione disulfide (GSSG). the relationship between the redox state of cardiomyocytes and their mechanical microenvironment remains elusive.

The Li Lab at the BEBC at Xi’an Jiaotong University investigated the influence of the mechanical microenvironment on the redox state of single cardiomyocytes in situ by SECM. The redox state was studied by quantifying the GSH level of living cardiomyocytes at single-cell level. Different mechanical microenvironments were simulated using polyacrylamide (PA) gels of different stiffness as the substrate. SECM depth scans were recorded and aprroach curves extracted to obtain rate constants kf for the reaction of the redox mediator FcCOOH and GSH which are a direct measure of GSH levels.

Li, Y., Lang, J., Ye, Z., Wang, M., Yang, Y., Guo, X., Zhuang, J., Zhang, J., Xu, F. and Li, F. (2020) ‘Effect of Substrate Stiffness on Redox State of Single Cardiomyocyte: A Scanning Electrochemical Microscopy Study’, Analytical Chemistry.

It was shown that stiffer substrates induce a more oxidative state of the cardiomyocytes compared to the softer substrates. This result can contribute to understand the effect of mechanical factors on the cell’s redox mechanism, such as the myocardial fibrosis caused overaccumulation of ECM.

SECM proved to be a sensitive, label-free and in situ technique for the investigation of redox state in single-cells.

HEKA’s ElProScan ELP 3 provides the ideal conditions for working with live single cells. The inverted microscope allows visual control of the cells and exact positioning of the microelectrode and a range of heated stages for working under physiological conditions. The unique depth scan allows the study of concentration profiles above single cells.

Updates

Covid-19 Update

We are committed to supporting your research during this challenging time by providing tools to help you find better treatments and improve the quality of lives.  As a global company, we operate in countries which have been impacted to varying degrees, and as such have taken the appropriate precautionary measures to ensure our employees’ health and safety is protected, while providing no disruption in your service:

  • Product manufacturing and order fulfillment: We have taken additional steps to ensure the safety of our employees, yet still maintain our normal order fulfillment times.
  • Sales support / consultation: To better support you during this period, we encourage you to schedule a virtual meeting with your local sales consultant. We find it to be the next best thing to visiting your site as it allows us to share relevant content for your use case / study design. 
  • Technical support and customer service: Our support teams remain available during our standard business hours to answer questions you may have.

We will continue to monitor the potential impact of the novel coronavirus (COVID-19). For any questions, please contact your local sales representative.

Your HEKA Team

bio-related FSCV

FSCV Update

Did you know that you can perform Fast-Scan Cyclic Voltammetry (FSCV) experiments with your ECP 10 USB Patch Clamp Amplifier or your Potentiostat of the PG Family?

FSCV with potential program in red and resulting current response in blue.

FSCV is used for detecting neurotransmitters, hormones or metabolites in live biological systems. A carbon fiber microelectrode is brought into close proximity to the site under investigation and a potential program is applied. It consists of a rapid triangular potential ramp of 400 V/s to detect the analyte by oxidation or reduction and a wait time at a holding potential between ramps to pre-concentrate the analyte at the microelectrode. The temporal resolution of FSCV is in the range of 100 ms and it has a high selectivity and sensitivity (10 nm LOD dopamine).

FSCV can be combined with other techniques such as fluorescence imaging or patch clamp.

PATCHMASTER and POTMASTER have new features for FSCV with

  • automatic peak detection,
  • automatic background subtraction,
  • synchronized triggers for external stimulus generators.

The potential program can be freely designed in the Pulse Generator File.

Learn more on our FSCV method page.

Contact us if you want to perform FSCV experiments and we will provide you with a FSCV configuration for PATCHMASTER or POTMASTER.

Nano Detection System

First Nano Detection System up and running

Our first Nano Detection System (NDS 10) is up and running in the Institute of Process Engineering at the Chinese Academy of Sciences.

The system is used for high-speed threshold experiments in the field of nanoelectrochemistry.

In the training session with our application scientist the formation of hydrogen nanobubbles at a platinum nanoelectrode was in the center of attention.

The experiments were performed in galvanostatic mode where a current pulse at the nanoelectrode drives the formation of hydrogen nanobubbles. The experiment is feedback-controlled and the current is set back to 0 nA upon reaching a predefined threshold which represents the start of nanobubble formation (here set to -0.85 V). The threshold detection is high-speed and takes only 10 µs. The current is set back within 50 µs. From the potential response valuable information such as nucleation rate can be extracted.

The experiments were performed according to this publication: German, S.R., Edwards, M.A., Ren, H. and White, H.S., 2018. Critical nuclei size, rate, and activation energy of H2 gas nucleation. Journal of the American Chemical Society, 140(11), pp.4047-4053.

Batteries Catalysts Coatings Corrosion SECCM SMCM

Holiday reading

While spending some time outside the lab to recover and enjoy the holiday season, why not have some reading material at hand?

We collected some recent articles on scanning micropipette techniques which are gaining increasing popularity at the moment.

With scanning micropipette techniques, the local electrochemistry of your sample can be studied. A micropipette is filled with electrolyte to form a small droplet at the opening. This droplet is brought into contact with the sample and forms a miniaturized electrochemical cell. This way, common bulk electrochemical experiments can be performed on the micron scale with spatial resolution. Polpular applications are the study of corrosion, coatings, battery materials and (photo)catalysts.

These scanning techniques are commonly called either scanning electrochemical cell microscopy (SECCM) or scanning micropipette contact method (SMCM) and might employ either double-barrel or single barrel micropipettes. If the micropipette is not scanned in a regular pattern, but rather moved to specific spots to collect local data, the technique is also just called micropipette contact method.


Gateman, S.M., Halimi, I., Costa Nascimento, A.R. et al., Using macro and micro electrochemical methods to understand the corrosion behavior of stainless steel thermal spray coatings. npj Mater Degrad 2019, 3, 25. (https://www.nature.com/articles/s41529-019-0087-0)

M. Dayeh, M. R. Z. Ghavidel, J. Mauzeroll, S. B. Schougaard, Micropipette Contact Method to Investigate High‐Energy Cathode Materials by using an Ionic Liquid, ChemElectroChem 2019, 6, 195. (https://onlinelibrary.wiley.com/doi/full/10.1002/celc.201800750)

N. A. Payne, J. Mauzeroll, Identifying Nanoscale Pinhole Defects in Nitroaryl Layers with Scanning Electrochemical Cell Microscopy, ChemElectroChem 2019, 6, 5439. (https://onlinelibrary.wiley.com/doi/full/10.1002/celc.201901394)

Beugré, R.; Dorval, A.; Lizotte Lavallée, L.; Jafari, M.; Byers, J.C., Local electrochemistry of nickel (oxy)hydroxide material gradients prepared using bipolar electrodeposition, Electrochimica Acta 2019, 319, 331-338. (https://www.sciencedirect.com/science/article/pii/S0013468619312861)

We wish you a successful end of the year and a good start into the next one!

bio-related Coatings SECM

Study of antimicrobial coatings by SECM

The infection of implants poses a common problem. It has been shown that photoactive titanium dioxide coatings can prevent microbial infections by producing free radicals under illumination. Because these free radicals can also damage adjacent cells, it has to ensured that their existence is confined to the implant surface.

The Sant Lab characterized a nitrogen- and self-doped titania coating which produces free hydroxyl radicals upon illumination of the material. Among other characterization techniques the coating was investigated by SECM towards the effects of free radicals on a reducible and oxidizable redox mediator upon irridation in different distances from the coating surface. It could be shown that the existence of free radicals is indeed confined to the vicinity of the surface.

The ElProScan in combination with our acquisition and analysis software POTMASTER allows the creation of complex protocols for automated experiments. The online analysis can display distance-dependent values, e.g. peak currents from a CV while you are still measuring.

Read the paper: https://pubs.acs.org/doi/10.1021/acsomega.9b02188

Batteries SMCM

Scanning Micropipette Contact Method for Battery Research

Battery materials often consist of multi-component composites which are not homogeneous. To study the intrinsic properties of active components is very challenging for conventional electrochemical techniques.

Recently, the Mauzeroll lab investigated single particle aggregates of lithium iron phosphate by scanning micropipette contact method (SMCM). To extend the potential window they used the ionic liquid EMI TFSI. The technique proofed to yield reproducible results and the redox activity of single lithium iron phosphate particles could be measured.

Measuring currents on single particle aggregates down to the lower pA range is no problem for HEKA’s potentiostats and full software implementation makes it very easy to conduct SMCM experiments with ElProScan.

SMCM of lithium iron phosphate particle in ionic liquid with HEKA ElProScan

Read the paper: https://onlinelibrary.wiley.com/doi/full/10.1002/celc.201800750